OSPF loading State

Tapio Haapala tapio.haapala at f-solutions.fi
Fri Jul 22 09:37:57 CEST 2011


We have similar issues but looks that it get fixed when you take newest 
svn version. BUT you get new problem that some times some routes does 
not sync and you need restart bird =)

21.7.2011 23:39, Ryan Whelan kirjoitti:
> On Thu, Jul 21, 2011 at 12:05 PM, Ryan Whelan<rcwhelan at gmail.com>  wrote:
>> I have 2 linux machines connected to one another over the internet via
>> a IPSec protected GRE tunnel.  Each of them are running OSPF from bird
>> 1.3.2.
>>
>> The issue is that one of them will not fully peer with the other,
>> unless the other is started after the one with the issue.  Is just
>> stays in state 'loading' while the other machine will be in state
>> 'full'.  In other words, node 2 will only go to state 'full' if node 1
>> is started after node 2. If node 2 is started after node 1, it will
>> sit in state 'loading' forever. Node 1 has no issues.
>>
>> Here is a log from the node that is failing to sync up (node 2):
>> http://pastebin.com/ZjVcc1wB
>>
>>
>> bird>  show ospf neighbors
>> axa0:
>> Router ID       Pri          State      DTime   Interface  Router IP
>> 111.222.333.444   1      loading/ptp    00:13   tun10      172.31.255.255
>> bird>
>>
>>
>>
>> the config on both machines is identical
>>
>>
>>
>> protocol kernel {
>>        learn;;
>>         persist;
>>         scan time 20;
>>         export all;
>> }
>>
>> protocol device {
>>         scan time 10;
>> }
>>
>> protocol static {
>> }
>>
>> protocol ospf axa0 {
>>         tick 1;
>>         rfc1583compat yes;
>>         area 0.0.0.0 {
>>                 stub no;
>>                 interface "tun*" {
>>                         hello 5;
>>                         retransmit 5;
>>                         cost 10;
>>                         transmit delay 5;
>>                         dead 15;
>>                         wait 50;
>>                         type ptp;
>>                 };
>>        };
>> }
>>
> If it means anything, the machine that was stuck in 'loading' changed
> to 'full' after I left it alone, but it took about 30 minutes.  Is
> that expected behaviour?

--
F-Solutions Oy

Tapio Haapala

PL 7, 90571 Oulu
GSM   040-0998371
Skype burner-
IRC   Burner at ircnet





More information about the Bird-users mailing list