bird 1.4.3 ospfv3 issue on openbsd
Job Snijders
job at instituut.net
Wed Jun 25 11:25:23 CEST 2014
Hi all,
I've upgraded up and down to see when the issue was introduced: between
1.4.0 and 1.4.1.
Ondrej, Martin, how can I help debug this? Would you like access to the
machines?
Kind regards,
Job
On Mon, Jun 23, 2014 at 04:02:25PM +0000, Job Snijders wrote:
> Hi all,
>
> I just upgraded from 1.4.0 to 1.4.3 (compiled from -current ports) on OpenBSD
> 5.5, now OSPFv3 adjecencies don't establish any longer, they remain stuck in
> exstart. I saw a thread a while ago about IPv6 issues on FreeBSD with 1.4.1,
> maybe this is related but the bug fix does not work on OpenBSD?
>
> syslog is filled with these messages:
>
> Jun 23 15:34:14 dcg-1 bird6: ospf1: Socket error on bnx0: Invalid argument
> Jun 23 15:34:24 dcg-1 last message repeated 6 times
> Jun 23 15:34:24 dcg-1 bird6: ospf1: Socket error on bnx2: Invalid argument
> Jun 23 15:34:24 dcg-1 bird6: ospf1: Socket error on bnx0: Invalid argument
> Jun 23 15:34:28 dcg-1 last message repeated 3 times
>
> this is my config:
>
> [root at dcg-1 ~]# cat /etc/bird6.conf
> log syslog all;
> router id 94.142.247.1;
> protocol kernel {
> scan time 20;
> export all;
> }
> protocol device {
> scan time 2;
> }
> protocol direct {
> interface "lo1";
> interface "bnx0";
> interface "bnx2";
> }
> protocol static {
> route 2a02:898::/32 blackhole;
> }
> filter only_loopbacks {
> if net ~ [ 2a02:898:0:300:0:0:0:0/64{128,128} ] then accept;
> reject;
> }
> protocol ospf ospf1 {
> tick 2;
> rfc1583compat yes;
> import filter only_loopbacks;
> export filter only_loopbacks;
> area 0.0.0.0 {
> interface "bnx0", "bnx2" {
> hello 10; retransmit 2; wait 10; dead 40;
> type pointopoint;
> };
>
> };
> }
>
> [root at dcg-1 ~]# birdc6 show ospf nei
> BIRD 1.4.3 ready.
> ospf1:
> Router ID Pri State DTime Interface Router IP
> 195.85.225.5 128 exstart/ptp 00:34 bnx0 fe80::21f:12ff:fe1c:3482
>
> Kind regards,
>
> Job
More information about the Bird-users
mailing list