OSPF export filter

Anton Kiryushkin swood at fotofor.biz
Thu Dec 3 16:28:53 CET 2015


Hello.

Yes, I tried it.

birdc show route export server1

showed me nothing. But 'show ospf state' showed me both ips with metric 0.

2015-12-03 9:55 GMT+03:00 viker <viker at viker.cz>:

> Hello,
> concretely "birdc show route export server1" show what ?
> Another good hint could be "birdc show ospf state", where you can see ospf
> informations about whole infrastructure which ospf knows.
> Vilem
>
> On 12/03/2015 01:50 AM, Anton Kiryushkin wrote:
>
>> Hello.
>>
>> I trying to use bird for export ospf route for Cisco Nexus with next
>> config:
>>
>> router id 10.34.23.1;
>>
>>
>> filter export_OSPF {
>>         if net = 77.71.22.23/32 <http://77.71.22.23/32> then {
>>                 ospf_metric1 = 20;
>>                 ospf_metric2 = 20;
>>                 print "net accepted:", net;
>>                 accept;
>>         }
>>         if net = 77.71.22.24/32 <http://77.71.22.24/32> then {
>>
>>                 ospf_metric1 = 10;
>>                 ospf_metric2 = 10;
>>                 print "net accepted:", net;
>>                 accept;
>>         }
>>         reject;
>> }
>>
>> protocol ospf server1 {
>>         export filter export_OSPF;
>>         #debug all;
>>         rfc1583compat yes;
>>         tick 2;
>>         area 0.0.0.0 {
>>                 stub no;
>>                 interface "bond0" {
>>                         dead 10;
>>                         neighbors {
>>                                 10.0.16.1;
>>                         };
>>                         type pointopoint;
>>                         authentication none;
>>                 };
>>                 interface "lo*" {
>>                         stub yes;
>>                         cost 10;
>>                         priority 200;
>>                 };
>>                 interface "dummy0" {
>>                         stub yes;
>>                         cost 15;
>>                         priority 100;
>>                 };
>>         };
>> }
>>
>>
>> But in birdc I didn't see any metrics. I have two server with same config
>> and same addresses on interfaces lo and dummy0 with different priorities.
>> Could you help me with export filter?
>>
>> --
>> Best regards,
>> Anton Kiryushkin
>>
>>
> --
>
>
> S pozdravem Vilem Kebrt
> email: viker at viker.cz
> tel: +420 604 550 132
>
>


-- 
Best regards,
Anton Kiryushkin
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://trubka.network.cz/pipermail/bird-users/attachments/20151203/acfe925d/attachment.html>


More information about the Bird-users mailing list