OSPF socket error on "bge0" invalid argument
plamen.stoev at profitbricks.com
Thu Jan 5 13:00:54 CET 2017
Can you please provide us with the output of 'ifconfig bge0' from both
It would also be helpful to get ping router-a from router-b and vise versa.
Does this work?
Thank you in advance.
On Tue, Jan 3, 2017 at 9:43 PM, David S. <david at zeromail.us> wrote:
> After installing a 1 server with FreeBSD11 and configure BIRD with minimum
> configuration I saw that error "invalid argument" for bge0 is still appear
> but not for igb*.
> This takes more than 4 days, still confusing.
> Does netmap cased this problem? Netmap is enabled by default on FreeBSD11
> Thank you
> Best regards,
> David S.
> e. david at zeromail.us
> w. pnyet.web.id
> p. 087881216110
> On Tue, Jan 3, 2017 at 4:53 PM, David S. <david at zeromail.us> wrote:
>> Hi Ondrej,
>> I have no firewall enable and it's not work on all card. I have 4 port
>> 1gbe broadcom and 4 port 1gbe intel I350 chipset based.
>> The clue I only have is ospf not sending hello packet between routera to
>> routerb vice versa, both of server use HP DL360 Gen9 FreeBSD11.
>> Both router has multiple bgp session and receive full route from the
>> It's weird, when routera able to send and receive ospf hello packets from
>> and to routerc vice versa, both of them are FreeBSD11.
>> I'll try to reinstall the OS and configure ospf first and then one by one
>> configure the bgp.
>> So, it's only happen to me? :d
>> Thanks anyway.
>> Best regards,
>> David S.
>> e. david at zeromail.us
>> w. pnyet.web.id
>> p. 087881216110
>> On Mon, Jan 2, 2017 at 9:04 PM, Ondrej Zajicek <santiago at crfreenet.org>
>>> On Mon, Jan 02, 2017 at 01:33:57AM +0700, David S. wrote:
>>> > Hi,
>>> > I tried to setup new environment using FreeBSD11 amd64 on vmware and
>>> > everything work without a problem, I didn't see any error or interface
>>> > issue like on routera and routerb. Let's say that new router we called
>>> > routerc and routerd.
>>> > I try to create ospf session between routera to routerc, routerb to
>>> > and the neighbor is appear, everything is normal.
>>> > I don't know why but the ospf hello packets are not sent by routera to
>>> > routerb or vice versa.
>>> It seems like some specific problem in your setup. Perhaps firewall or
>>> insufficient privileges? Does it work with different network card?
>>> Elen sila lumenn' omentielvo
>>> Ondrej 'Santiago' Zajicek (email: santiago at crfreenet.org)
>>> OpenPGP encrypted e-mails preferred (KeyID 0x11DEADC3, wwwkeys.pgp.net)
>>> "To err is human -- to blame it on a computer is even more so."
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the Bird-users