show route command syntax

[Chris Herdt]

I'm using BIRD v2.0.2. I have successfully peered with another host and am
receiving iBGP routes.

bird> show route count
0 of 0 routes for 0 networks in table master4
0 of 0 routes for 0 networks in table master6
9763 of 9763 routes for 9763 networks in table vpntab4
0 of 0 routes for 0 networks in table vpntab6
Total: 9763 of 9763 routes for 9763 networks in 4 tables

I can use 'show route all' to see all the routes (IP addresses replaced):

bird> show route all
Table vpntab4:
192.168.100.0:24 192.168.42.199/32 unreachable [peer1 13:22:47.245 from
192.168.12.3] * (100/-) [AS65321i]
    Type: BGP univ
    BGP.origin: IGP
    BGP.as_path: 65321
    BGP.next_hop: 192.168.100.0
    BGP.local_pref: 100
    BGP.originator_id: 192.168.100.0
    BGP.cluster_list: 192.168.12.3 192.168.100.1
    BGP.ext_community: (rt, 65123, 65555)
    BGP.mpls_label_stack: 54321
etc.

However, I can't seem to figure out the syntax to retrieve a specific
route. E.g.:

bird> show route for 192.168.42.199/32
Network not found

Thanks in advance.

-- 
Chris Herdt
https://osric.com/chris/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://trubka.network.cz/pipermail/bird-users/attachments/20180822/71f7b4c1/attachment.html>