Recommended way to shutdown a working BGP session -- ordered bgp session stop -- bgp session shutdown
Francis Brosnan Blázquez
francis.brosnan at aspl.es
Mon Dec 10 10:32:23 CET 2018
Hello Michael.
Thanks for the info; very useful.
Considering this, could we say BGP is faster removing routes when
session is lost/closed/shut down than when they are added?
Even though you start receiving traffic right away you setup a BGP
session, we have seen it takes hours (even days) to fully propagate new
BGP upstream we added in the past.
Did you find this behavior too?
Thanks Michael.
Best Regards.
PD: Just to clarify point 2) Another solution is to just shutdown BGP
session but leave upstream connected and configured (so outdated
routers we still reach us...) AND unplug the cable after traffic
disappears.
> We are using option number 2.
>
>
>
> After 600 seconds, all routes via the shutted down peer will get
> invalid.
>
>
> So just wait 10 Minutes and your inbound traffic should stop.
>
>
> .........
>
>
> But there was a another thread with a feature request to send
> withdraws to your peer, so you can immediatley shutdown your network
> interface after shutting down the bgp session.
>
>
>
>
>
> Am Sa., 8. Dez. 2018, 04:03 hat Francis Brosnan Blázquez
> <francis.brosnan at aspl.es> geschrieben:
>
> Hello.
>
> We are using bird with several upstream providers, all of them
> with a
> share of traffic.
>
> We are in the process of shutting down one of them but we are
> unsure
> how to proceed to minimize loss of traffic.
>
> We have been reading and looking for general recommendations
> but it is
> not clear (besides using graceful shutdown which is not
> supported by
> the upstream we want to shutdown).
>
> We have been looking at mailing list but we haven't found
> anything
> treating this matter.
>
> So far, solutions we have come up are:
>
> 1) Use AS-path prepend to increase metric on the uptstream to
> be
> shutted down and once nearly no traffic comes in through that
> link, shutdown
> BGP and unplug. Something like:
>
> export filter
> {
>
> if source = RTS_STATIC then { # Export only static
> routes
> # Assign our
> community
>
> bgp_community.add((65000,64501));
> # Artificially increase path
> length
> # by advertising local AS number
> twice
> if bgp_path ~ [= 65000 =]
> then
> bgp_path.prepend(65000);
> bgp_path.prepend(65000);
>
> accept;
> }
>
> reject;
> };
>
> 2) Another solution is to just shutdown BGP session but leave
> upstream
> connected and configured (so outdated routers we still reach
> us...).
>
> 3) And the obvious, just shutdown BGP session and unplug the
> cable.
>
> It would be great to know your opinion and what's the
> recommended way
> to proceed.
>
> What do you think?
>
> Many thanks
> Best Regards.
>
>
>
>
>
--
Francis Brosnan Blázquez - ASPL
http://www.asplhosting.com/
http://www.aspl.es/
https://twitter.com/aspl_es
https://twitter.com/asplhosting
https://twitter.com/francisbrosnanb
https://es.linkedin.com/in/francis-brosnan-blázquez-1353a218
91 134 14 22 - 91 134 14 45 - 91 116 07 57
Av. Juan Carlos I 13, 2ºC, Torre Garena
28806 - Alcalá de Henares (España)
AVISO LEGAL
En virtud de lo dispuesto en la Ley Orgánica 15/1999, de 13 de
diciembre, de Protección de Datos de Carácter Personal, le informamos de
que sus datos de carácter personal, recogidos de fuentes accesibles al
público o datos que usted nos ha facilitado previamente, proceden de
bases de datos propiedad de Advanced Software Production Line, S.L.
(ASPL).
ASPL garantiza que los datos serán tratados con la finalidad de mantener
las oportunas relaciones comerciales o promocionales con usted o la
entidad que usted representa. No obstante, usted puede ejercitar sus
derechos de acceso, rectificación, cancelación y oposición dispuestos en
la mencionada Ley Orgánica, notificándolo por escrito a ASPL -
Protección Datos, Av. Juan Carlos I 13, 2ºC, Alcalá de Henares
(Madrid).
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://trubka.network.cz/pipermail/bird-users/attachments/20181210/35f63909/attachment.html>
More information about the Bird-users
mailing list