After update bird 1.6.3->1.6.4 my filter don't working

[Гришин В.С.]

My apologies. I found mistake.


18.07.2018 15:23, Ondrej Zajicek пишет:
> On Wed, Jul 18, 2018 at 12:59:42PM +0300, Владислав Гришин wrote:
>> After update bird not announce prefixes with the same filter in config
> Hi, works for me (with 1.6.4, your filter and two test routes):
>
> BIRD 1.6.4 ready.
> bird> show route preexport bgp1
> 10.1.10.0/24       via 10.1.1.10 on ve0 [static1 14:19:22] * (200)
> 10.1.11.0/24       via 10.1.1.10 on ve0 [static1 14:19:22] * (200)
> 10.4.10.0/24       via 10.0.4.1 on ve2 [bgp2 14:19:27] * (100) [AS40i]
> 10.4.11.0/24       via 10.0.4.1 on ve2 [bgp2 14:19:27] * (100) [AS40i]
> 193.9.244.0/22     dev lo [static1 14:19:22] * (200)
> 91.211.216.0/22    dev lo [static1 14:19:22] * (200)
> bird> show route export bgp1
> 193.9.244.0/22     dev lo [static1 14:19:22] * (200)
> 91.211.216.0/22    dev lo [static1 14:19:22] * (200)
>
> Other side:
>
> bird> show route 91.211.216.0/22 all
> 91.211.216.0/22    via 10.0.1.1 on ve2 [bgp2 14:19:28] * (100) [AS10i]
>      Type: BGP unicast univ
>      BGP.origin: IGP
>      BGP.as_path: 48720 48720 48720 48720 10
>      BGP.next_hop: 10.0.1.1
>      BGP.local_pref: 100
>      BGP.community: (8905,1050)
>
>
> Main question is whether do you see these routes in your local table.
>
Vladislav Grishin

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://trubka.network.cz/pipermail/bird-users/attachments/20180720/ce673c85/attachment.html>