Hello Ondrey,

yes it's clear, just cant get all AS paths behind your neighbors, just selected.
So i assume to get that information i need to use provided looking glasses of the neighbors.

Many Thanks again.

Regards,

Arjan Filius

On Wed, 2010-06-23 at 09:09 +0200, Ondrej Filip wrote:

On 23.6.2010 07:58, Arjan Filius wrote:
> Hello Ondrey, bird-users.
>
> Not having a problem, just curious on the AS path redundancy of my
> neighbors.

OK, so was my answer sufficient?

			Ondrej


>
> Regards,
>
> Arjan Filius
>
>
> On Tue, 22 Jun 2010, Ondrej Filip wrote:
>
>> On 22.6.2010 14:17, Arjan Filius wrote:
>>> Hello Bird-users,
>>>
>>> Is there a way to get all route AS-path's information , and not just the
>>> slected path?
>>> either all, or just a specific route?
>>
>> I don't undestand you problem. If you get a specific route from two
>> (or more) different BGP protocols, all instances are stored in routing
>> table. By 'show route all' you can see all the paths. Look at this
>> example.
>>
>> bird> show route 217.31.192.0/20
>> 217.31.192.0/20 via 194.50.100.3 on eth1 [R25192x2 May05] * (100)
>> [AS25192i]
>> via 194.50.100.13 on eth1 [R25192x1 14:56] (100) [AS25192i]
>> bird> show route 217.31.192.0/20 all
>> 217.31.192.0/20 via 194.50.100.3 on eth1 [R25192x2 May05] * (100)
>> [AS25192i]
>> Type: BGP unicast univ
>> BGP.origin: IGP
>> BGP.as_path: 25192
>> BGP.next_hop: 194.50.100.3
>> BGP.med: 0
>> BGP.local_pref: 100
>> BGP.atomic_aggr:
>> BGP.aggregator: 217.31.205.209 AS25192
>> BGP.community: (0,39392)
>> via 194.50.100.13 on eth1 [R25192x1 14:56] (100) [AS25192i]
>> Type: BGP unicast univ
>> BGP.origin: IGP
>> BGP.as_path: 25192
>> BGP.next_hop: 194.50.100.13
>> BGP.local_pref: 100
>> BGP.community: (0,39392)
>> bird>
>>
>>
>>> I can see all routes, with it's selected path, but not (or don't know
>>> how to do it) all possible AS-path's.
>>>
>>> Thanks in advance
>>>
>>> Regards,
>>>
>>
>>
>