Hello,

We use bird 1.4.2 as route server with multiple RIBs with ~100 BGP active sessions.
Over one of these sessions, we're receiving ~ 360k prefixes and re-announcing them to all other sessions.

By my calculations the total amount of all prefixes in all RIBs is about ~ 3600000 and till now everything was OK.

But today we have experienced the following issue:

When we stopped the session that we received ~360k, BIRD daemon went to 100% usage and held this behavior for
period of~5-6 min. This event caused а lot of ( but not all ) sessions to start flapping.

Here is the output taken from our log during the event:

Sep 18 10:40:51 rs2 bird: R0_69: Received: Hold timer expired
Sep 18 10:40:51 rs2 bird: R0_69: BGP session closed
Sep 18 10:40:52 rs2 bird: R0_69: Down
Sep 18 10:41:11 rs2 bird: R0_69: Startup delayed by 60 seconds
Sep 18 10:41:45 rs2 bird: R0_69: Incoming connection from 10.0.0.69 (port 13073) rejected
Sep 18 10:41:59 rs2 bird: R0_69: Started
Sep 18 10:42:36 rs2 bird: R0_69: Incoming connection from 10.0.0.69 (port 24222) accepted
Sep 18 10:42:36 rs2 bird: R0_69: BGP session established

The above lines was repeated for all other affected sessions.

After the CPU peak of 5 min, all affected sessions became UP again.

Our CPU arch is 2 x Intel(R) Xeon(R) CPU E5310 1.6Ghz with 4 cores.

I know BIRD that still may use only 1 CPU core but is there any plans to use more?

We will highly appreciate for any suggestions or share some experience how to prevent in future such event.

Thanks in advance!

Best~
--
---
Find out about our new Cloud service - Cloudware.bg
Access anywhere. Manage it yourself. Pay as you go.
Javor Kliachev
IP Engineer

Neterra Ltd.
Telephone: +359 2 975 16 16
Fax: +359 2 975 34 36
www.neterra.net