are you able to ping each other from either host? ß Yes, Can Ping
May I know is there any network/IGP setup first?
Rae
From: Bird-users <bird-users-bounces@network.cz> On Behalf Of Quan Zhou
Sent: Tuesday, June 5, 2018 3:51 PM
Cc: bird-users@network.cz
Subject: Re: BIRD router/route server functions
>> Last error: Socket: No route to host
looks like the problem is not with the bird. Although it looks like both hosts are on the same subnet, but are you able to ping each other from either host?
On Tue, Jun 5, 2018 at 3:19 PM Rae Ho (ITSC) <raeho@cuhk.edu.hk> wrote:
Dear Quan Zhou,
Thanks for your help. Rae
Router1 (/etc/bird.conf)
log syslog all;
router id 192.168.199.12;
protocol kernel {
# learn; # Learn all alien routes from the kernel
persist; # Don't remove routes on bird shutdown
scan time 20; # Scan kernel routing table every 20 seconds
# import none; # Default is import all
export all; # Default is export none
# kernel table 5; # Kernel table to synchronize with (default: main)
}
protocol device {
scan time 10; # Scan interfaces every 10 seconds
}
protocol bgp {
import all;
export all;
local as 76543;
neighbor 192.168.199.13 as 87654;
}
Router1 (birdc show proto all)
BIRD 1.4.5 ready.
name proto table state since info
kernel1 Kernel master up 2018-05-18
Preference: 10
Input filter: ACCEPT
Output filter: ACCEPT
Routes: 0 imported, 0 exported, 0 preferred
Route change stats: received rejected filtered ignored accepted
Import updates: 0 0 0 0 0
Import withdraws: 0 0 --- 0 0
Export updates: 0 0 0 --- 0
Export withdraws: 0 --- --- --- 0
device1 Device master up 2018-05-18
Preference: 240
Input filter: ACCEPT
Output filter: REJECT
Routes: 0 imported, 0 exported, 0 preferred
Route change stats: received rejected filtered ignored accepted
Import updates: 0 0 0 0 0
Import withdraws: 0 0 --- 0 0
Export updates: 0 0 0 --- 0
Export withdraws: 0 --- --- --- 0
bgp1 BGP master start 2018-05-18 Connect Socket: No route to host
Preference: 100
Input filter: ACCEPT
Output filter: ACCEPT
Routes: 0 imported, 0 exported, 0 preferred
Route change stats: received rejected filtered ignored accepted
Import updates: 0 0 0 0 0
Import withdraws: 0 0 --- 0 0
Export updates: 0 0 0 --- 0
Export withdraws: 0 --- --- --- 0
BGP state: Connect
Neighbor address: 192.168.199.13
Neighbor AS: 87654
Last error: Socket: No route to host
Router2 (/etc/bird.conf)
log syslog all;
router id 192.138.199.13;
protocol kernel {
# learn; # Learn all alien routes from the kernel
persist; # Don't remove routes on bird shutdown
scan time 20; # Scan kernel routing table every 20 seconds
# import none; # Default is import all
export all; # Default is export none
# kernel table 5; # Kernel table to synchronize with (default: main)
}
protocol device {
scan time 10; # Scan interfaces every 10 seconds
}
protocol bgp {
import all;
export all;
local as 87654;
neighbor 192.168.199.12 as 76543;
Router2 (birdc show proto all)
BIRD 1.4.5 ready.
name proto table state since info
kernel1 Kernel master up 2018-05-18
Preference: 10
Input filter: ACCEPT
Output filter: ACCEPT
Routes: 0 imported, 0 exported, 0 preferred
Route change stats: received rejected filtered ignored accepted
Import updates: 0 0 0 0 0
Import withdraws: 0 0 --- 0 0
Export updates: 0 0 0 --- 0
Export withdraws: 0 --- --- --- 0
device1 Device master up 2018-05-18
Preference: 240
Input filter: ACCEPT
Output filter: REJECT
Routes: 0 imported, 0 exported, 0 preferred
Route change stats: received rejected filtered ignored accepted
Import updates: 0 0 0 0 0
Import withdraws: 0 0 --- 0 0
Export updates: 0 0 0 --- 0
Export withdraws: 0 --- --- --- 0
bgp1 BGP master start 2018-05-18 Active Socket: No route to host
Preference: 100
Input filter: ACCEPT
Output filter: ACCEPT
Routes: 0 imported, 0 exported, 0 preferred
Route change stats: received rejected filtered ignored accepted
Import updates: 0 0 0 0 0
Import withdraws: 0 0 --- 0 0
Export updates: 0 0 0 --- 0
Export withdraws: 0 --- --- --- 0
BGP state: Active
Neighbor address: 192.168.199.12
Neighbor AS: 76543
Start delay: 0/5
Last error: Socket: No route to host
From: Bird-users <bird-users-bounces@network.cz> On Behalf Of Quan Zhou
Sent: Monday, June 4, 2018 6:01 PM
Cc: bird-users@network.cz
Subject: Re: BIRD router/route server functions
It'd be more helpful you can provide your `bird.conf` and `birdc show proto all` if all possible.
On Mon, Jun 4, 2018 at 4:54 PM Rae Ho (ITSC) <raeho@cuhk.edu.hk> wrote:
Dear MO,
Thank you very much for your response.
Yes, I followed the sample to set up the routers but don’t why the peering session between them is not established.
Rae
From: mo@linx.net <mo@linx.net>
Sent: Monday, June 4, 2018 4:40 PM
To: Rae Ho (ITSC) <raeho@cuhk.edu.hk>
Cc: bird-users@network.cz
Subject: Re: BIRD router/route server functions
On 4 Jun 2018, at 07:08, Rae Ho (ITSC) <raeho@cuhk.edu.hk> wrote:
Dear All,
I’m Rae of CUHK. We are exploring BIRD router/route server functions.
Now I set up 2 BIRD routers to from BGP session between them, seems It can’t form the peering (in active status).
Questions:
1. Is there any pre-config need to be set up? (i.e. interface? Internal Subnet?)
2. Would you mind sending me some sample configurations?
Rae