Hi, What is proper syntax for this kind of show route: bird> show route protocol ECO where net ~ 2.2.2.250/31 all 2.2.2.250/31 via 1.1.1.66 on eth0.930 [ECO 08:53:25] * E2 (150/200/10000) [1.1.1.66] Type: OSPF-E2 unicast univ OSPF.metric1: 200 OSPF.metric2: 10000 OSPF.tag: 0x00000000 OSPF.router_id: 1.1.1.66 bird> show route protocol ECO where ospf_router_id ~ 1.1.1.66 bird> I expect, that second show route should show the same output as first. -- Regards, Luk
Hi, AFAIK, there is no option to filter the show route using router id. Thank you Best regards, David S. ------------------------------------------------ e. david@zeromail.us w. pnyet.web.id On Tue, Aug 1, 2017 at 2:26 PM, Luk <skidoo@tlen.pl> wrote:
Hi,
What is proper syntax for this kind of show route:
bird> show route protocol ECO where net ~ 2.2.2.250/31 all 2.2.2.250/31 via 1.1.1.66 on eth0.930 [ECO 08:53:25] * E2 (150/200/10000) [1.1.1.66] Type: OSPF-E2 unicast univ OSPF.metric1: 200 OSPF.metric2: 10000 OSPF.tag: 0x00000000 OSPF.router_id: 1.1.1.66 bird> show route protocol ECO where ospf_router_id ~ 1.1.1.66 bird>
I expect, that second show route should show the same output as first.
-- Regards, Luk
On Tue, Aug 01, 2017 at 09:26:29AM +0200, Luk wrote:
What is proper syntax for this kind of show route:
bird> show route protocol ECO where net ~ 2.2.2.250/31 all 2.2.2.250/31 via 1.1.1.66 on eth0.930 [ECO 08:53:25] * E2 (150/200/10000) [1.1.1.66] Type: OSPF-E2 unicast univ OSPF.metric1: 200 OSPF.metric2: 10000 OSPF.tag: 0x00000000 OSPF.router_id: 1.1.1.66 bird> show route protocol ECO where ospf_router_id ~ 1.1.1.66 bird>
I expect, that second show route should show the same output as first.
Like this? root@eunetworks-2:~# birdc show route where ospf_router_id = 94.142.247.2 all BIRD 1.6.3 ready. 94.142.247.2/32 via 94.142.247.243 on eth8.108 [ospf1 2017-07-19 23:09:36] * E2 (150/20/10000) [94.142.247.2] Type: OSPF-E2 unicast univ OSPF.metric1: 20 OSPF.metric2: 10000 OSPF.tag: 0x00000000 OSPF.router_id: 94.142.247.2 Kind regards, Job
Hi,
On Tue, Aug 01, 2017 at 09:26:29AM +0200, Luk wrote:
What is proper syntax for this kind of show route:
bird> show route protocol ECO where net ~ 2.2.2.250/31 all 2.2.2.250/31 via 1.1.1.66 on eth0.930 [ECO 08:53:25] * E2 (150/200/10000) [1.1.1.66] Type: OSPF-E2 unicast univ OSPF.metric1: 200 OSPF.metric2: 10000 OSPF.tag: 0x00000000 OSPF.router_id: 1.1.1.66 bird> show route protocol ECO where ospf_router_id ~ 1.1.1.66 bird>
I expect, that second show route should show the same output as first.
Like this?
root@eunetworks-2:~# birdc show route where ospf_router_id = 94.142.247.2 all BIRD 1.6.3 ready. 94.142.247.2/32 via 94.142.247.243 on eth8.108 [ospf1 2017-07-19 23:09:36] * E2 (150/20/10000) [94.142.247.2] Type: OSPF-E2 unicast univ OSPF.metric1: 20 OSPF.metric2: 10000 OSPF.tag: 0x00000000 OSPF.router_id: 94.142.247.2
Kind regards,
Like this, thank You ! I assume, that in filters syntax is the same ? -- Regards, Luk
participants (3)
-
David S. -
Job Snijders -
Luk