-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hello list! There are a bunch of IP addresses used in example bird.conf. Maybe we can consider using addresses from rfc5737 (IPv4 Address Blocks Reserved for Documentation) for this? I mean, do sed 's?62.168.0?198.51.100?g' bird.conf, for example The same approach can be taken for ASN, there is rfc 5398 giving us 64496 - 64511 ASN block for 16-bits ASN. Diff to current bird.conf (just an example) attached P.S. and consider using rfc3849 2001:DB8::/32 when writing examples for bird6.conf -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.14 (FreeBSD) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/ iEYEARECAAYFAk6IR7EACgkQwcJ4iSZ1q2nOegCeMnYdufDLiCMP9K635P9NgB9h pKEAoKgTQYv/Em+m7RZZGbXJ3Fb0XEAy =5Q10 -----END PGP SIGNATURE----- --- bird.conf.example 2011-09-29 18:38:34.000000000 +0400 +++ /home/melifaro/bird.conf 2011-10-02 15:10:33.964294041 +0400 @@ -10,7 +10,7 @@ #log "tmp" all; # Override router ID -#router id 62.168.0.1; +#router id 198.51.100.1; # You can define your own symbols... #define xyzzy = (120+10); @@ -66,12 +66,12 @@ # preference 1000; # Default preference of routes # debug { states, routes, filters, interfaces, events, packets }; # debug all; -# route 0.0.0.0/0 via 62.168.0.13; -# route 62.168.0.0/25 reject; +# route 0.0.0.0/0 via 198.51.100.13; +# route 198.51.100.0/25 reject; # route 10.0.0.0/8 reject; -# route 10.1.1.0:255.255.255.0 via 62.168.0.3; -# route 10.1.2.0:255.255.255.0 via 62.168.0.3; -# route 10.1.3.0:255.255.255.0 via 62.168.0.4; +# route 10.1.1.0:255.255.255.0 via 198.51.100.3; +# route 10.1.2.0:255.255.255.0 via 198.51.100.3; +# route 10.1.3.0:255.255.255.0 via 198.51.100.4; # route 10.2.0.0/24 via "arc0"; } @@ -168,7 +168,7 @@ # disabled; # description "My BGP uplink"; # local as 65000; -# neighbor 62.168.0.130 as 5588; +# neighbor 198.51.100.130 as 64496; # multihop; # hold time 240; # startup hold time 240; @@ -183,7 +183,7 @@ # path metric 1; # Prefer routes with shorter paths (like Cisco does) # default bgp_med 0; # MED value we use for comparison when none is defined # default bgp_local_pref 0; # The same for local preference -# source address 62.168.0.14; # What local address we use for the TCP connection +# source address 198.51.100.14; # What local address we use for the TCP connection # password "secret"; # Password used for MD5 authentication # rr client; # I am a route reflector and the neighor is my client # rr cluster id 1.0.0.1; # Use this value for cluster id instead of my router id @@ -193,7 +193,7 @@ # bgp_community = -empty-; bgp_community = add(bgp_community,(65000,5678)); # bgp_origin = 0; # bgp_community = -empty-; bgp_community.add((65000,5678)); -# if (65000,5678) ~ bgp_community then +# if (65000,64501) ~ bgp_community then # bgp_community.add((0, 1)); # if bgp_path ~ [= 65000 =] then # bgp_path.prepend(65000);