Hi, I posted a while ago with some problems that I thought were probably due my IPSEC set-up, so I switched to StrongSWAN to try and simplify things. I now get my IPSEC routes appearing in kernel table 220, and I’d like to import these routes into Bird. As a first step, If I start Bird up with the config file below on Machine B: log syslog all; debug protocols all; protocol kernel { learn; persist; scan time 10; import all; export none; kernel table 220; } protocol device { scan time 10; } # Not sure this stuff is relevant for this question protocol ospf myOSPF { import all; export all; area 0 { interface “tunnelAB" { cost 5; type ptp; hello 5; retransmit 2; wait 10; dead 20; }; }; } I see messages in my /var/log/syslog saying “Received route … with strange next-hop …” as it picks up my table 220 routes. If I then run “birdc” and do a “show route” I get nothing output. Is this expected? Iain