(mistakenly sent off-list) -------- Original Message -------- From: Maria Matejka <maria.matejka@nic.cz> Sent: 13 April 2024 18:18:05 CEST To: Erin Shepherd <bird-users@erinshepherd.net> Subject: Re: babel RTT metric false samples Just quick thought – I think both approaches (timestamping in kernel and in userspace) are actually useful for different purposes. Thus, we shall support both. Transferred to our internal issue: https://gitlab.nic.cz/labs/bird/-/issues/61 Maria On 13 April 2024 16:38:47 CEST, Erin Shepherd <bird-users@erinshepherd.net> wrote:
I guess it might not fit with bird's abstractions (or perhaps the Babel protocol), but has thought been given to using SO_TIMESTAMPING to have the kernel compute TX/RX timestamps?
- Erin
On Sat, 13 Apr 2024, at 16:14, Maria Matejka via Bird-users wrote:
Hello Stephanie, Toke and list,
On Fri, Apr 12, 2024 at 04:22:50PM +0200, Toke Høiland-Jørgensen via Bird-users wrote:
Stephanie Wilde-Hobbs via Bird-users bird-users@network.cz writes:
The babel RTT metric measurements provided by bird appears suspect for my setup. The metric through a tunnel with a latency of about 5ms is shown in babel as 150+ms.
[…]
Debug logs show many RTT samples with approximately correct timestamps (4-6ms) then the occasional IHU with 800-1200ms calculated instead. Calculating the RTT metric by hand using babel packet logs shows that the calculations are correct. By correlating two packet dumps (the machines have <1ms NTP timekeeping) I can also see that the packets for which high RTT is calculated have similar transit times through the tunnel as other packets. Hence, I suspect the accuracy of the packet timestamps recorded by bird. Is the current packet timestamping system giving correct timestamps if the packet arrives while babel is processing another event?
Hmm, so Babel implementation in Bird tries to get a timestamp as early as possible after receiving the packet, and set it as late as possible before sending out the packet. However, the former in practice means after returning from poll(), so if the packet has been sitting around in the OS buffer for a while before Bird gets around to process it, the timestamp is not set until Bird is done processing it. Likewise, if the packet sits around in a socket buffer (or in a lower-level buffer on the sending side) after Bird has sent it out, that time will also be counted as part of the RTT.
I would suspect that the kernel table prune routine may be the case. It just runs from begin to end synchronously.
I have just fast-tracked Babel in its own thread for BIRD 3, it may be worth checking. (There should be also artifacts from the build process for download available.) This should get you rid of most of the cases of suspiciously high RTT.
`https://gitlab.nic.cz/labs/bird/-/tree/babel-in-threads` Just to be noted, updating a route in BIRD 3 is still a locking process so it may still tamper the RTT measurements. At least it should happen only in cases where Babel is doing the update. Anyway, with BIRD 3 internals, it should be possible to easily *detect* such situations and disregard these single measurements as unreliable. (Not implemented, though.)
There are even some thoughts on implementing lockless import queues for routing tables, yet now we have to prioritize BIRD 3 stabilization to actually release it as a stable version. Import queues must wait.
Also with this testing, feel free to report any weird behavior, notably crashes of BIRD 3, as bugs. That would be very helpful with stabilizing BIRD 3. Thanks a lot!
Maria
– Maria Matejka (she/her) | BIRD Team Leader | CZ.NIC, z.s.p.o.
-- Maria Matejka (she/her) | BIRD Team Leader | CZ.NIC, z.s.p.o. -- Maria Matejka (she/her) | BIRD Team Leader | CZ.NIC, z.s.p.o.