Hello, I would like to configure RIP with different ACLs set on different RIP interfaces. For this purpose I thought I could use the '*ifname*' route attribute in bird filters. The problem I am facing is that when I use it, no RIP routes are announced at all, so maybe I am using a wrong syntax. If I don't use the *ifname = "eth0" *I see the following sent from the bird's RIP instance (10.0.4.1 is configured on eth1 and 172.16.0.4 on eth0). I would like the 10.2.4.1/32 route to be announced through eth0 only. I have also tried to use the *ifname ~ "eth0" *syntax with no luck. *tcpdump:* # tcpdump -i any -vvnn port 520 tcpdump: listening on any, link-type LINUX_SLL (Linux cooked), capture size 65535 bytes 13:02:58.664760 IP (tos 0xc0, ttl 1, id 27713, offset 0, flags [none], proto UDP (17), length 52) *10.0.4.1.520* > 224.0.0.9.520: [udp sum ok] RIPv2, Response, length: 24, routes: 1 or less AFI IPv4, *10.2.4.1/32 <http://10.2.4.1/32>*, tag 0x0000, metric: 1, next-hop: self 0x0000: 0202 0000 0002 0000 0a02 0401 ffff ffff 0x0010: 0000 0000 0000 0001 13:03:14.686163 IP (tos 0xc0, ttl 1, id 27714, offset 0, flags [none], proto UDP (17), length 52) *172.16.0.4.520* > 224.0.0.9.520: [udp sum ok] RIPv2, Response, length: 24, routes: 1 or less AFI IPv4, *10.2.4.1/32 <http://10.2.4.1/32>*, tag 0x0000, metric: 1, next-hop: self 0x0000: 0202 0000 0002 0000 0a02 0401 ffff ffff 0x0010: 0000 0000 0000 0001 *bird config:* protocol kernel { # persist; # Don't remove routes on BIRD shutdown scan time 20; # Scan kernel routing table every 20 seconds export all; # Default is export none learn; device routes; } protocol device { scan time 10; # Scan interfaces every 10 seconds } protocol direct { interface "*"; } filter rip_export { # redistribute connected + RIP + ACL if ( ( source = RTS_DEVICE || source = RTS_RIP ) && ( net ~ 10.2.4.0/24 && *ifname = "eth0"* ) ) then { print "net export accepted: ", net; accept; } reject; } protocol rip RIP { debug all; interface "eth0" {mode multicast; split horizon yes; poison reverse no; }; interface "eth1" {mode multicast; split horizon yes; poison reverse no; }; import all; export filter rip_export; } Any help would be appreciated, thank you. Alex