Hello Bird users, I tried to configure the/my first multihop bgp configuration for monitoring purposes, but i don't get the correct network exported. Our setup: 2 Bird bgp routers, connected with iBGP, and bot have there own transit's. the published /20 network work just fine for about one year now (no multihop). Now i'm setting up a multihop bgp with source an redundant internal VRRP address which belongs to that published /20 to another bird i've controll of, on both bgp routers. (so actually only the one which has the vrrp address is working/active) I've applied one "trick" as i don't know which transit is wil take now or in the feature, i set the next hop to it's source (the vrrp address) Everything seems to be exported (and imported on other side), except my /20 where it is all about. when i type: show route all export <myprotocolname> or show route xx.x.x/20 export it actually shows the /20 route but sniffing learnes the actually it is't get published to the other side. The /20 gets published just fine for the regular transits, and i've no clue yet what is going on. Enabeling debug isn't for the protocol isn't currently what i like to on this production system. Has any an idea what might going on here? running bird 1.2.4 Arjan Filius Thanks in advance, -- Arjan Filius mailto:iafilius@xs4all.nl