After some digging it was kinda obvious, I copied the config from another host where the interface was named `uplink` but on this node it's enp3s0 so `protocol direct` didn't import any routes. On 10.08.21 13:08, Tim Meusel wrote:
Hi, I'm running bird 2.0.8 on Arch Linux:
I would like to import local device routes and export them via BGP. My assumption is that the direct protocol would be required here? My config looks like this:
router id 192.168.178.35; debug protocols all; log syslog { debug, trace, info, remote, warning, error, auth, fatal, bug }; timeformat protocol iso long; protocol device { scan time 10; interface "uplink" { preferred 192.168.178.35; }; } protocol kernel kernelv4 { learn; persist; scan time 20;
ipv4 { import all; export filter { if source = RTS_STATIC then reject; krt_prefsrc = OWNIP; accept; }; }; } protocol direct { ipv4; ipv6; interface "uplink"; }
The box has a few local routes: # ip -4 r s default via 192.168.178.1 dev enp3s0 proto dhcp src 192.168.178.35 metric 1024 169.254.0.7 dev as3668-1 proto kernel scope link src 169.254.0.8 169.254.0.9 dev as3668-2 proto kernel scope link src 169.254.0.10 172.17.0.0/16 dev docker0 proto kernel scope link src 172.17.0.1 linkdown 192.168.178.0/24 dev enp3s0 proto kernel scope link src 192.168.178.35 metric 1024 192.168.178.1 dev enp3s0 proto dhcp scope link src 192.168.178.35 metric 1024
But it looks like the direct protocol doesn't import any routes and via the kernel I don't get theh route for 192.168.178.0/24?
root@server ~ # birdc show route protocol device1 BIRD 2.0.8 ready. No valid tables root@server ~ # birdc show route protocol kernelv4 BIRD 2.0.8 ready. Table master4: 0.0.0.0/0 unicast [kernelv4 2021-08-08] * (10) via 192.168.178.1 on enp3s0 192.168.178.1/32 unicast [kernelv4 2021-08-08] * (10) dev enp3s0 root@server ~ #
any clues why I don't see see "192.168.178.0/24 dev enp3s0" route in bird?
Cheers, Tim