One more (last) question: since when (which Bird) -release is ECMP like this supported? Thx BR Ar Am Di., 11. Juni 2019 um 15:39 Uhr schrieb Kenth Eriksson < Kenth.Eriksson@infinera.com>:
On Tue, 2019-06-11 at 15:13 +0200, Arno O wrote:
all, Alexander,
bingo, "ip route" does the job ( sorry, was not aware about that difference). Thanx
Message only sent to me, please re-post to list so that they can see your resolution of the problem.
Enjoy the day BR Ar
[root@localhost ~]# ip route 10.10.10.0/24 dev enp0s3 proto bird scope link metric 10 10.10.10.0/24 dev enp0s3 proto kernel scope link src 10.10.10.1 metric 100 50.50.50.0/24 proto bird metric 10 nexthop via 10.10.10.2 dev enp0s3 weight 11 nexthop via 10.10.10.3 dev enp0s3 weight 11 192.168.122.0/24 dev virbr0 proto kernel scope link src 192.168.122.1 linkdown 192.168.122.0/24 via 10.10.10.3 dev enp0s3 proto bird metric 10 [root@localhost ~]#
Am Di., 11. Juni 2019 um 14:56 Uhr schrieb Arno O <odermaar@gmail.com
: Dear Kenth,
there is no such error trace in syslog
(bird log setting: # Configure logging log syslog all;)
How to proceed?
BR Ar
Am Di., 11. Juni 2019 um 14:36 Uhr schrieb Kenth Eriksson < Kenth.Eriksson@infinera.com>:
On Tue, 2019-06-11 at 14:18 +0200, Arno O wrote:
CAUTION: This email originated from outside of the organization. Do not click links or open attachments unless you recognize the sender and know the content is safe.
This topic was already discussed around March 1st 2019, without having received a clear outcome.
Now, dealing with ECMP with OSPF in Bird 2.04 on Fedora30, I run in same problems:
-> multiple next hops to same destination (50.50.50.0/24) are in the route table of bird: bird> sho route Table master4: 10.10.10.0/24 unicast [OIPv46 13:39:16.979] I (150/10) [10.10.10.1] dev enp0s3 192.168.122.0/24 unicast [OIPv46 13:46:18.979] E2 (150/10/10000) [10.10.10.3] via 10.10.10.3 on enp0s3 50.50.50.0/24 unicast [OIPv46 13:46:18.979] E2 (150/10/100) [10.10.10.3] via 10.10.10.2 on enp0s3 weight 11 via 10.10.10.3 on enp0s3 weight 11 bird> [root@localhost ~]#
but kernel route table looks unexpectedly different: root@localhost ~]# netstat -rn Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface 10.10.10.0 0.0.0.0 255.255.255.0 U 0 0
0 enp0s3 50.50.50.0 10.10.10.2 255.255.255.0 UG 0 0
0 enp0s3 192.168.122.0 10.10.10.3 255.255.255.0 UG 0 0
0 enp0s3 [root@localhost ~]#
Do you see them if you do 'ip route'? I think iproute2 is better at displaying multipath routes.
Kernel looks configured correctly (CONFIG_IP_ROUTE_MULTIPATH=y), etc.etc.
If the kernel is mis-configured, I believe you get an error trace in the bird log. Something along the following lines;
<WARN> Netlink: Invalid argument
I tested it on 2.0.4 and kernel 4.14.92+ and that seems to work.
Bird config on ECMPed bird router: protocol ospf OIPv46 { tick 2; rfc1583compat yes; ecmp yes limit 8; merge external yes; ipv4 { import all; export all; }; area 0 { interface "enp0*" { # type broadcast; # Detected by default cost 10; # Interface metric ecmp weight 11;
What is missing either in the bird-config or the kernel part?
Thx
BR Ar