Hello, I’m trying to use RFC 5549 and RFC 2545 to do this route advertisement, and it seems it should work according to the bird documentation. However, bird is sending an empty NLRI whenever I use a v6 next-hop, either link-local or global. I've tried various combinations of specifying the route "via" or "next hop address" with the global or link-local address, I haven't found a combination that it likes. In any case, bird would need to figure out the right tuple (global, link-local) to send in the extended next hop message. Tcpdump: Update Message (2), length: 29 Multi-Protocol Unreach NLRI (15), length: 3, Flags [O]: AFI: IPv6 (2), SAFI: Unicast (1) End-of-Rib Marker (empty NLRI) 0x0000: 0002 01 bird> show static 198.18.235.70/32 via 2001:4878:c1e1:4015::c612:ea44%eth0 Example config: router id 192.18.234.68; protocol device { } protocol kernel { ipv4 { import none; export none; }; } protocol static static2 { ipv4; route 198.18.235.70/32 via 2001:4878:c1e1:4015::c612:ea44 % eth0; } protocol bgp uplink1 { local 198.18.234.68 as 20940; neighbor 198.18.234.65 as 20940; ipv4 { export all; next hop address fe80::216:3eff:fe3c:e58; extended next hop; }; };