Hello! Of course this is only a workaround But..... I use this command with Cisco 7200 12.2(28)SB5 software, which is older than 12.3(21) Another temporaly solution is to disable lls globally . router ospf 1 router-id 10.0.0.2 no capability lls 2010/3/19 Vitaliy Kolodinsky <kolodinsky@telecom.by>:
Dear, Csaba Szép.
Вы писали 19 марта 2010 г., 19:11:51:
In my opinion, this is the same issue that i reported at 2009.10.05 in this list.
Then i disabled LLS in the cisco side, and after everything works well.
ip ospf lls disable
Using the ip ospf lls disable probably quite a good temporary solution, but the old IOS, this command is not
bras7 (config-subif) # ip ospf lls disa ^ % Invalid input detected at '^' marker.
bras7 (config-subif) # do sh ver Cisco Internetwork Operating System Software IOS (tm) 7200 Software (C7200-JS-M), Version 12.3 (21), RELEASE SOFTWARE (fc2) Technical Support: http://www.cisco.com/techsupport
With pleasure I will see a patch from the author and with no less pleasure test the patch work.
--
Best regards, Vitaliy Kolodinsky BYVK-RIPE ISP Atlant Telecom kolodinsky@telecom.by