Re: about the bgp route reflector problem?

2 Nov 2017

      Maybe I'm missing something here, but in the examples you show,
120.26.0.0/18 and 122.72.90.78/32 have not been reflected? Route Reflection
deals with iBGP only -- eBGP to iBGP does not need a route reflector. Only
the attributes learned on the iBGP session from R4 will be reflected (and
have the originator and cluster attributes set) to R1.

Does that make sense?

Matthew Walster

On 2 November 2017 at 11:30, 曾小小 <flyinsky2018@gmail.com> wrote:
...
about the bgp route reflector problem?
Why does the reflector client receive EBGP routing entries without
attributes??
my topology is shown below:
R3 (as 100)
|
                 |   （ebgp）
|
|
                 |            ( ibgp)
        R1 (RR)--------------------R4 (client) (as 200)
|
                 |
                 |
|   ( ibgp )
                 |
|
    R2 （client）(as 200)
My configuration is as follows：
===The R1 (RR) configuration is as follows:
#ebgp parts
protocol bgp bgp_pa_r3 {
        description "ebgp-pa-r3";
        multihop 10;
        table tab_pa_adsl;
        igp table tab_ospf_10;
        local as 200;
        neighbor 192.168.1.1 as 100;
        source address 192.168.1.2;
        import all;
        export all;
        next hop self;
        default bgp_local_pref 5;
}
#rr parts
template bgp rr_client {
        description "ibgp-rr1";
        local 192.168.2.1 as 200;
        multihop;
        rr client;
        rr cluster id 1.1.1.1;
        }
protocol bgp bgp_pa_r2 from rr_client {
        debug all;
        enable route refresh on;
        table tab_rr_1;
        igp table tab_ospf_10;
        neighbor 192.168.2.2 as 200;
        export all;
        import all;
        }
protocol bgp bgp_pa_r4 from rr_client {
        table tab_rr_1;
        igp table tab_ospf_10;
        neighbor 192.168.2.4 as 200;
        export all;
        import all;
       # next hop self;
        }
==The R2 client configuration is as follows:
protocol bgp bgp_pa_r2 {
        router id 192.168.2.2;
        debug all;
#       debug { states,interfaces,events };
        description "ibgp-rr1";
        import all;
        export all;
        local as 200;
        neighbor 192.168.2.1 as 200;
        source address 192.168.2.2;
        next hop self;
}
==================
Check the route of R2 and find that the route entry received R4 has the
BGP.originator_id and BGP.cluster_list attributes,
 but the entry received from R1 does not have this attribute. why?
Thank you very much for your help!! thanks!!
The route entries viewed by R2 are as follows:
bird> show route protocol bgp_pa_r2 all
1007-121.52.236.16/32
1008- Type: BGP unicast univ
1012- BGP.origin: IGP
      BGP.as_path:
      BGP.next_hop: 192.168.2.4
      BGP.local_pref: 100
     * BGP.originator_id: 192.168.2.4*
*      BGP.cluster_list: 1.1.1.1*
1007-116.211.98.20/32
1008- Type: BGP unicast univ
1012- BGP.origin: IGP
      BGP.as_path:
      BGP.next_hop: 192.168.2.4
      BGP.local_pref: 100
   *   BGP.originator_id: 192.168.2.4*
*      BGP.cluster_list: 1.1.1.1*
1007-120.26.0.0/18
1008- Type: BGP unicast univ
1012- BGP.origin: IGP
      BGP.as_path: 100
      BGP.next_hop: 192.168.1.1
      BGP.local_pref: 5
1007-122.72.90.78/32
1008- Type: BGP unicast univ
1012- BGP.origin: IGP
      BGP.as_path: 100
      BGP.next_hop: 192.168.1.1
      BGP.local_pref: 5