Are you tried to use nbma for interface tap? 2018-03-21 22:08 GMT+01:00 Michael McConnell <michael@winkstreaming.com>:
Hello all,
I am trying to establish OSPF over OpenVPN without any luck. The client side always turns up with no neighbours. I’ve tried pointtopoint and exclusively listing my neighbours all with no luck.
I originally was using the tun interface and switched to tap hoping that would help, but still nothing.
Below are my configurations, does anyone see anything obvious that I am missing?
Thanks so much for your time and thoughts!
=== show ospf ospf1: RFC1583 compatibility: disabled Stub router: No RT scheduler tick: 1 Number of areas: 1 Number of LSAs in DB: 1 Area: 0.0.0.0 (0) [BACKBONE] Stub: No NSSA: No Transit: No Number of interfaces: 0 Number of neighbors: 0 Number of adjacent neighbors: 0
Server ===
protocol ospf { import all; export filter { ospf_metric1 = 1000; if source = RTS_STATIC then accept; else reject; }; area 0 { networks { 10.40.32.0/24; 10.10.10.32/27; };
interface "bond1" { type broadcast; cost 5; hello 5; wait 10; dead 25; authentication cryptographic; password “boogers"; };
interface "tap*" { type broadcast; cost 5; hello 5; wait 10; dead 25; authentication cryptographic; password “boogers"; };
interface "*" { cost 1000; stub; #type pointopoint; };
};
Client === protocol ospf { import all; export filter { ospf_metric1 = 1000; if source = RTS_STATIC then accept; else reject; }; area 0 { networks { 10.40.32.0/24; 10.10.10.32/27; };
interface "bond1" { type broadcast; cost 5; hello 5; wait 10; dead 25; authentication cryptographic; password “boogers"; }; interface "tap*" { type broadcast; cost 5; hello 5; wait 10; dead 25; authentication cryptographic; password "boogers"; };
interface "*" { cost 1000; stub; #type pointopoint; }; };
-- Michael McConnell WINK Streaming; email: michael@winkstreaming.com toll free: 877-GO-4-WINK x 7400 direct: +1 312 281-5434 cell: +506 8706-2389 skype: wink-michael web: http://winkstreaming.com