Hi All, Discovered something interesting in bird2 2.0.7 (via bird2 package on Centos7, 2.0.7-1.el7) when retrying to use statics to override a default route coming via BGP. The following block would not see the higher preference route added (not even listed in 'show route protocol WANSTATICS'), but when commented out and config reloaded the gw via 172.16.4.250 would vanish, then come back when I restarted WANSTATICS. protocol static WANSTATICS { ipv4 { table WAN; }; route 0.0.0.0/0 via 172.16.1.254 { preference = 110; # override upstream }; route 0.0.0.0/0 via 172.16.4.250 { preference = 90; # prefer one to come from upstream via BGP }; check link on; } It was working on another sibling router node, but the two route blocks were reversed: protocol static WANSTATICS { ipv4 { table WAN; }; route 0.0.0.0/0 via 172.16.4.250 { preference = 90; # prefer one to come from upstream via BGP }; route 0.0.0.0/0 via 172.16.1.254 { preference = 110; # override upstream }; check link on; } Lo and behold, switch them around on the problematic node and suddenly everything behaves, 'show route protocol WANSTATICS' lists the new route and it propagates into the routing table too. There's nothing that I could see in the documentation to explain this, wondering if anyone else has seen something similar? Regards, William