Hello there, I get the error message: "<ERR> bfd1: Socket error: Destination address required" (ubuntu 22.04, bird via ppa 2.15.1) running BFD and MP-BGP via IPv6 over wireguard interfaces. Not all BGP neighbors are reachable. Relevant (I hope) config: log "/var/log/bird/bird.log" all; protocol device { } protocol bfd { accept ipv6 direct; interface "wg_blue*"; interface "wg_green" { multiplier 3; interval 500 ms; }; neighbor 2001:db8:f000::2 dev "wg_green" local 2001:db8:f000::1; neighbor 2001:db8:f000:ffff::2 dev "wg_blue2" local 2001:db8:f000:ffff::1; neighbor 2001:db8:f000:fffc::5 dev "wg_blue1" local 2001:db8:f000:fffc::1; neighbor 2001:db8:f000:fffc::4 dev "wg_blue1" local 2001:db8:f000:fffc::1; neighbor 2001:db8:f000:fffc::3 dev "wg_blue1" local 2001:db8:f000:fffc::1; neighbor 2001:db8:f000:fffc::2 dev "wg_blue1" local 2001:db8:f000:fffc::1; } protocol bgp EXAMPLE { local as 65001; neighbor 2001:db8:f000::2 as 65044; direct; med metric yes; ipv4 { ... }; ipv6 { ... }; bfd on; } If I remove the BFD config for the non-established BGP neighbors, the error message disappears (although there are still non-established BFD sessions for established BGP neighbors (BFD not yet confed on the other end)). At first I did not create neighbor statements for BFD, then I added "dev" and "local" options - no improvement. No revelations with "debug protocols all". Any ideas? Thanks a lot! Best, fran