On August 22, 2018 8:40:16 PM GMT+02:00, Chris Herdt <cherdt@gmail.com> wrote:
I'm using BIRD v2.0.2. I have successfully peered with another host and am receiving iBGP routes.
bird> show route count 0 of 0 routes for 0 networks in table master4 0 of 0 routes for 0 networks in table master6 9763 of 9763 routes for 9763 networks in table vpntab4 0 of 0 routes for 0 networks in table vpntab6 Total: 9763 of 9763 routes for 9763 networks in 4 tables
I can use 'show route all' to see all the routes (IP addresses replaced):
bird> show route all Table vpntab4: 192.168.100.0:24 192.168.42.199/32 unreachable [peer1 13:22:47.245 from 192.168.12.3] * (100/-) [AS65321i] Type: BGP univ BGP.origin: IGP BGP.as_path: 65321 BGP.next_hop: 192.168.100.0 BGP.local_pref: 100 BGP.originator_id: 192.168.100.0 BGP.cluster_list: 192.168.12.3 192.168.100.1 BGP.ext_community: (rt, 65123, 65555) BGP.mpls_label_stack: 54321 etc.
However, I can't seem to figure out the syntax to retrieve a specific route. E.g.:
bird> show route for 192.168.42.199/32 Network not found
Thanks in advance.
Hello! You are using a vpn4 table so you should ask for a vpn4 prefix, like show route for 192.168.100.0:24 192.168.42.99/32 I'm writing from my phone, not testing it. Anyway, it should work. Maria