On 01/06/2016 09:26 AM, viker wrote:
Hello everybody, i have a strange problem with propagation of subnets to OSPF area. scheme:
--------------- Area 0 ----------------- -- Router1 -- ------------------ -- Router 2 -- --------------- ----------------- | LAGG iface | LAGG iface
On both routers are bonded ifaces in LAGG. When i create vlan on LAGG trunk (i'm on FreeBSD 10.2. bird 1.5.0), i have in route export only ip/32 on vlan iface, not whole subnet. Configuration of bird:
#### Main #### log "/var/log/bird.log" all; router id XXX.XXX.XXX.XXX; debug protocols all;
protocol static { route YYY.YYY.YYY.YYY/NN via "vlanXX"; export all; import all; }
protocol device { scan time 120; export all; }
protocol kernel { learn; persist; scan time 30; import all; export all; }
protocol ospf { import filter { accept; }; export all; area 0.0.0.0 { interface "ix0" { cost 10; type broadcast; hello 10; retransmit 5; wait 15; dead 30; };
networks { 10.0.0.0/8; 172.16.0.0/12; 192.168.0.0/16; }; }; };
Interesting thing is , when i import subnet to main table via :route XXX.XXX.XXX.XXX via "vlanXXX"; in static protocol and do birdc configure, propagation is working. So it seems to me that protocol device (or kernel) is not correctly importing created subnet into main table. Any ideas ? Thank You All Viker
No reaction ? nobody has bird 1.5.0 on freebsd 10.2 with this issue ? What about at least some information on which section could be problem ? Viker -- S pozdravem Vilem Kebrt email: viker@viker.cz tel: +420 604 550 132