Hi all, A quick try to fix the problem. But I'm not sure in complete correctness though. On Sat, Jan 21, 2023 at 8:17 PM Prem Anand <h.prem.anand@gmail.com> wrote:
Hi Ondrej, Thanks for your quick reply. I tried after adding another ip address to the interface on the FRR side and can confirm that both my bgp neighbours came up :)
Unfortunately, my original intention is to peer this with a Brocade hardware router, that I don’t have control of. So it is difficult for me to add another IP address or bind to a different port.
Given that you feel that the explicit lock is restrictive and unnecessary, it would be really helpful, if you could remove that explicit lock when you get some time.
Regards Prem
On 21 Jan 2023, at 18:43, Ondrej Zajicek <santiago@crfreenet.org> wrote:
On Sat, Jan 21, 2023 at 06:05:16PM +0000, Prem Anand wrote:
Hi all, New user here
I am trying to get 2 ebgp neighbours on bird to peer with a remote bgp endpoint on frr node. One between 10.100.101.1 <—> 10.100.1.1 and other between 10.100.102.1 <—> 10.100.1.1
┌──────────────────┐ ┌─────────────┐ 10.100.101.1 │ │ensp5s0 │ │ loop1 * Bird │◄──────────────────────►┘ Frr │ │ 2.0.10 │10.100.1.2 10.100.1.1 │ loop2 * │ │ │ 10.100.102.1 │ │ │ │ └──────────────────┘ └─────────────┘
I find that only the first ebgp neighbour comes up and moves to "Established” state whereas the second ebgp neighbour remains in “Idle” state. However if I restart the bgp neighbour in “Established” state, the other bgp neighbour comes up and moves to “Established” state, but the restarted one remains in Idle state.
Is there any limitation that I can’t have 2 neighbours to the same peer? Or do I have to ensure that the 2 neighbours use different tables?
Hi
Yes, there is an explicit lock for remote IP to be assigned to one BGP protocol. You can avoid it by using different IP on Frr side like you use on Bird side, or by using pair of non-standard ports (with the same IP).
Thinking about it, the explicit lock seems unnecessary restrictive. If the local IP is defined, then the lock should be for (local IP, remote IP, ports) pair.
-- Elen sila lumenn' omentielvo
Ondrej 'Santiago' Zajicek (email: santiago@crfreenet.org) OpenPGP encrypted e-mails preferred (KeyID 0x11DEADC3, wwwkeys.pgp.net) "To err is human -- to blame it on a computer is even more so."