Try this: show route all 192.168.7.0/24 On Sat, Apr 27, 2019 at 9:54 PM Pieter De Wit <pieter@insync.za.net> wrote:
Sorry, I did forget that off the email:
bird> show route 192.168.7.0/24 192.168.7.0/24 via 10.255.255.101 on ppp1 [bgp_site_1 07:50:22] * (100) [AS65101i]
Should that last section not contain all the numbers ?
That command was ran on the VPN server btw :)
On 28/04/2019, at 7:50 AM, Alexander Zubkov <green@qrator.net> wrote:
Hi,
Why do you think there are no prepends? Have you look at the receiving side what is sent?
On Sat, Apr 27, 2019 at 9:16 PM Pieter De Wit <pieter@insync.za.net> wrote:
Hi Everyone,
I have been fighting with this now for a while and I can’t seem to get my paths prepended. I am running 1.6.3 from the Ubuntu repo.
Network wise, I have a VPN server that takes VPNs from remote sites. This VPN server exports the ranges to the rest of the network. It learns the connected sites from a Raspberry PI on site. These links are used as backup paths :)
Here is the BGP config on the server, from a remote site:
The filters basically just restrict it to RFC1918 addresses
protocol bgp bgp_site_1 { description “site_1"; local as 65001; neighbor 10.255.255.101 as 65101; import filter remote_sites; export filter export_to_remote_sites; }
Here is the config on the remote site:
filter prepend_path { bgp_path.prepend(65101); bgp_path.prepend(65101); bgp_path.prepend(65101); accept; }
protocol bgp itc_vpn { description "ITC VPN"; local as 65101; neighbor 10.255.255.1 as 65001; import all; export filter prepend_path; }
What am I missing ?
Thanks !