Good day. I'm new to BIRD, and am having an issue that's hopefully a simple fix. I'm running bird 1.2.5-1 on Debian, installed via package. My end goal is to use the BIRD process as a RTBH trigger via BGP. Currently, I'm unable to get BIRD to import kernel routes into the BIRD process, aside from the system default route. Interaction with the kernel definitely works; when I peer up with my BGP neighbor, our edge router with public BGP routes, they import and show up in the kernel route table without a problem. Here's my route table, and relevant sections of the BIRD config, and outputs from birdc. Thanks in advance for any assistance. root@genericsystemsimage:~# route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 172.16.100.100 * 255.255.255.255 UH 0 0 0 eth0 207.251.204.0 * 255.255.255.240 U 0 0 0 eth0 default host-10.204-251 0.0.0.0 UG 0 0 0 eth0 root@genericsystemsimage:~# protocol kernel { learn; # Learn all alien routes from the kernel persist; # Don't remove routes on bird shutdown scan time 20; # Scan kernel routing table every 20 seconds import all; # Default is import all export all; # Default is export none } protocol device { scan time 10; # Scan interfaces every 10 seconds } protocol bgp test { description "Test peer"; local as XXXX; neighbor A.B.C.D as XXXX; import none; export all; } bird> show route 0.0.0.0/0 via 207.251.204.10 on eth0 [kernel1 16:57] * (10) bird> show protocols all name proto table state since info kernel1 Kernel master up 16:57 Preference: 10 Input filter: ACCEPT Output filter: ACCEPT Routes: 1 imported, 0 exported, 1 preferred Route change stats: received rejected filtered ignored accepted Import updates: 1 0 0 0 1 Import withdraws: 0 0 --- 0 0 Export updates: 1 1 0 --- 0 Export withdraws: 0 --- --- --- 0 -- Thomas Beecher II Senior Network Administrator LocalNet Corp. CoreComm Internet Services tbeecher at localnet dot com