Hello, I've tried this config in order to achive multipath some-load balance and fail over with bgp but with no luck.. bgp prefers one of the default GWs, so I had to use static multipath to achieve it, but this is for operating reasons only, I would like bgp to do it What is wrong with my config ??? Thanks Harry -------------------------- log syslog all; router id 10.0.173.254; protocol device { scan time 10; } protocol kernel { export all; scan time 15; } protocol static { preference 150; route 0.0.0.0/0 multipath via 10.0.11.1 weight 100 via 10.0.12.1 weight 5; } protocol static static_bgp { import all; route 10.0.0.0/8 reject; #route A.B.C.0/24 reject; #route D.E.F.0/24 reject; } protocol bgp c2811_1 { import all; export where proto = "static_bgp"; local as 64580; neighbor 10.0.11.1 as 64561; } protocol bgp c2811_2 { import all; export where proto = "static_bgp"; local as 64580; neighbor 10.0.12.1 as 64562; } ---------------------------------------------