Hi guys, I'm having an issue where IPv6 routes from the kernel routing table don't appear to end up in my t_kernel6 table. Despite the next-hop being link-local and the interface being UP. IPv4 routes I have no problem with, working as expected. I must be doing something wrong on my side, if someone could kindly point me in the right direction. (the below is configuration I'm testing with, I have manually set the MAC addresses and IP's for testing purposes within a LXC container so I can test results across configuration changes) Here is the snippet of config with... protocol device { description "Device protocol"; scan time 10; }; protocol kernel kernel4 { description "Kernel protocol for IPv4"; metric 600; learn; ipv4 { table t_kernel4; export all; import all; }; }; protocol kernel kernel6 { description "Kernel protocol for IPv6"; metric 600; learn; ipv6 { table t_kernel6; export all; import all; }; }; Here is the error I'm getting in my logs and fc11::/64 is not being shown in my t _kernel6 table... 2019-09-11 11:40:36.653 <ERR> KRT: Received route fc11::/64 with strange next-hop fc10::2 The interface is however UP and fc10::2 is link local. Here is the output of 'ip link'... (eth1 is UP) 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 2: eth0@if3: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP mode DEFAULT group default qlen 1000 link/ether 02:01:00:00:00:01 brd ff:ff:ff:ff:ff:ff link-netnsid 0 4: *eth1*@if5: <BROADCAST,MULTICAST,UP,*LOWER_UP*> mtu 1500 qdisc noqueue state *UP* mode DEFAULT group default qlen 1000 link/ether 02:01:00:00:00:02 brd ff:ff:ff:ff:ff:ff link-netnsid 0 Here is the output of 'ip -6 address'... 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 state UNKNOWN qlen 1 inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0@if3: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 state UP qlen 1000 inet6 fc00::1/64 scope global valid_lft forever preferred_lft forever inet6 fe80::1:ff:fe00:1/64 scope link valid_lft forever preferred_lft forever 4: eth1@if5: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 state UP qlen 1000 inet6 *fc10::1/64* scope global valid_lft forever preferred_lft forever inet6 fe80::1:ff:fe00:2/64 scope link valid_lft forever preferred_lft forever Here is the kernel routing table 'ip -6 route'... fc00::/64 dev eth0 proto kernel metric 256 pref medium fc10::/64 dev eth1 proto kernel metric 256 pref medium *fc11::/64 via fc10::2 dev eth1 metric 1024 pref medium* fe80::/64 dev eth0 proto kernel metric 256 pref medium fe80::/64 dev eth1 proto kernel metric 256 pref medium Kind Regards -N