Hi guys, I'm having an issue where IPv6 routes from the kernel routing table don't appear to end up in my t_kernel6 table. Despite the next-hop being link-local and the interface being UP. IPv4 routes I have no problem with, working as expected. I must be doing something wrong on my side, if someone could kindly point me in the right direction. (the below is configuration I'm testing with, I have manually set the MAC addresses and IP's for testing purposes within a LXC container so I can test results across configuration changes) Here is the snippet of config with...    protocol device {       description "Device protocol";       scan time 10;   };   protocol kernel kernel4 {       description "Kernel protocol for IPv4";       metric 600;       learn;       ipv4 {           table t_kernel4;           export all;           import all;       };   };   protocol kernel kernel6 {       description "Kernel protocol for IPv6";       metric 600;       learn;       ipv6 {           table t_kernel6;           export all;           import all;       };   }; Here is the error I'm getting in my logs and fc11::/64 is not being shown in my t _kernel6 table... 2019-09-11 11:40:36.653 <ERR> KRT: Received route fc11::/64 with strange next-hop fc10::2 The interface is however UP and fc10::2 is link local. Here is the output of 'ip link'...  (eth1 is UP)   1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1       link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00   2: eth0@if3: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP mode DEFAULT group default qlen 1000       link/ether 02:01:00:00:00:01 brd ff:ff:ff:ff:ff:ff link-netnsid 0   4: *eth1*@if5: <BROADCAST,MULTICAST,UP,*LOWER_UP*> mtu 1500 qdisc noqueue state *UP* mode DEFAULT group default qlen 1000       link/ether 02:01:00:00:00:02 brd ff:ff:ff:ff:ff:ff link-netnsid 0 Here is the output of 'ip -6 address'...   1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 state UNKNOWN qlen 1       inet6 ::1/128 scope host          valid_lft forever preferred_lft forever   2: eth0@if3: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 state UP qlen 1000       inet6 fc00::1/64 scope global          valid_lft forever preferred_lft forever       inet6 fe80::1:ff:fe00:1/64 scope link          valid_lft forever preferred_lft forever   4: eth1@if5: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 state UP qlen 1000       inet6 *fc10::1/64* scope global          valid_lft forever preferred_lft forever       inet6 fe80::1:ff:fe00:2/64 scope link          valid_lft forever preferred_lft forever Here is the kernel routing table 'ip -6 route'...  fc00::/64 dev eth0 proto kernel metric 256 pref medium   fc10::/64 dev eth1 proto kernel metric 256 pref medium   *fc11::/64 via fc10::2 dev eth1 metric 1024 pref medium*   fe80::/64 dev eth0 proto kernel metric 256 pref medium   fe80::/64 dev eth1 proto kernel metric 256 pref medium Kind Regards -N