July 2024 - Bird-users - Mailing Lists

Babel RTT settings for low and high latencies
by Marek Küthe 17 Jul '24

17 Jul '24

Hello, I have (once again) [1] some questions about babel's rtt: I have a network with several servers, which are distributed worldwide and connected via WireGuard tunnels. I run Babel as the routing protocol between them. Some of the VM's are in the same data center (latency < 1ms) and some are very far away (Germany <-> Hong Kong 300ms-400ms). Which rtt-min, rtt-max and rtt-cost/max-rtt-penalty would be suitable for such a network? I would be very happy to receive ideas and suggestions! Greetings Marek Küthe [1] https://www.mail-archive.com/bird-users@network.cz/msg07641.html -- Marek Küthe m.k(a)mk16.de er/ihm he/him

1 0

EVPN IRB - RFC 9135 support
by Erik Stomp 13 Jul '24

13 Jul '24

Dear BIRD community, I plan to use the BIRD EVPN beta implementation (https://gitlab.nic.cz/labs/bird/-/tree/evpn?ref_type=heads) for a private Lab. I use EVPN in my employer's data center (based on FRR), so I am already quite familiar with EVPN. If I don't miss anything, the current EVPN implementation does't support EVPN IRB as described in RFC 9135. Since I only want to use BIRD EVPN in a lab, this is not a big problem for me. Of course I could use FRR, which supports IRB, but since I use BIRD everywhere, it would be nice if I could also use it in the EVPN lab. So my question is: Are there any plans to implement RFC 9135 in the foreseable future? I know, this isn't a 5 minute task and fully understand if it's not planned due to low priority. Maybe I can use the new L3VPN feature as an alternative then. Has anyone tried it yet? Otherwise, I'll have a look at it, as soon as I find some time. Best regards, Erik

3 3

Limit of numbers of BGP communities
by Ponikierski, Grzegorz 13 Jul '24

13 Jul '24

Hello all! How many standard communities, extended communities and large communities, user can apply on a route using Bird? BGP UPDATE message has finite size so I guess that there must be a limit somewhere. Regards, Grzegorz Ponikierski Senior Network Engineer Akamai Technologies AS20940 and AS21342

4 6

What is the expected iBGP behaviour for routes with different local_pref?
by Nico Schottelius 06 Jul '24

06 Jul '24

Hello everyone, I was wondering how bird *should* behave if within one AS a route is received from outside multiple times but with different local_pref set? My expectation would be that using iBGP, the lower local_pref route would show up on all routers, but the higher one is selected. What I observe is that seems the router who initially receives the lower local_pref route does not export it via iBGP, even though it matches the export filter. Example: - server145 has a non-preferable uplink and imports all routes with local_pref = 80 - server137 has a preferable uplink and imports all routes without local_pref modification, thus local_pref = 100 - server145 has both routes - server137 only has the preferable route - It seems that server145 is not exporting its lower local_pref routes, even though they match the export filter Excerpt from server145, importing 2600:: route from outside, with setting local_pref to 80: -------------------------------------------------------------------------------- bird> show route all for 2600:: Table master6: 2600::/48 unicast [ibgp_server137 14:34:07.078 from 2a0a:e5c0:0:b::89] * (100/96) [AS1239i] via fe80::3eec:efff:fed2:d1e4 on eth0 Type: BGP univ BGP.origin: IGP BGP.as_path: 209898 39040 1299 174 1239 BGP.next_hop: 2a0a:e5c0:31:2::1 BGP.local_pref: 100 BGP.community: (1299,20000) (39040,100) (39040,109) (39040,1000) BGP.otc: 209898 unicast [outgoing_server120 14:33:56.123] (100) [AS1239i] via 2a0a:e5c0:31:4::1 on tun1 Type: BGP univ BGP.origin: IGP BGP.as_path: 209898 39040 1299 174 1239 BGP.next_hop: 2a0a:e5c0:31:4::1 fe80::897b:493f:bd44:ec60 BGP.local_pref: 80 BGP.community: (1299,20000) (39040,100) (39040,109) (39040,1000) BGP.otc: 209898 unicast [outgoing_server121 14:34:41.137] (100) [AS1239i] via 2a0a:e5c0:32:4::1 on tun0 Type: BGP univ BGP.origin: IGP BGP.as_path: 209898 15576 3356 174 1239 BGP.next_hop: 2a0a:e5c0:32:4::1 fe80::fa84:82d2:a117:43c BGP.local_pref: 80 BGP.community: (3356,2) (3356,22) (3356,86) (3356,505) (3356,601) (3356,666) (3356,903) (3356,2074) (15576,100) (15576,102) (15576,1000) BGP.otc: 209898 unicast [ibgp_server138 14:34:56.416 from 2a0a:e5c0:0:b::8a] (100/96) [AS1239i] via fe80::3eec:efff:fed2:d0c4 on eth0 Type: BGP univ BGP.origin: IGP BGP.as_path: 209898 15576 3356 174 1239 BGP.next_hop: 2a0a:e5c0:32:2::1 BGP.local_pref: 100 BGP.community: (3356,2) (3356,22) (3356,86) (3356,505) (3356,601) (3356,666) (3356,903) (3356,2074) (15576,100) (15576,102) (15576,1000) BGP.otc: 209898 -------------------------------------------------------------------------------- And on server137, this route is not visible, only the local_pref = 100 are visible: -------------------------------------------------------------------------------- bird> show route all for 2600:: Table master6: 2600::/48 unicast [outgoing_server120 14:41:16.420] * (100) [AS1239i] via 2a0a:e5c0:31:2::1 on oserver120 Type: BGP univ BGP.origin: IGP BGP.as_path: 209898 39040 1299 174 1239 BGP.next_hop: 2a0a:e5c0:31:2::1 BGP.local_pref: 100 BGP.community: (1299,20000) (39040,100) (39040,109) (39040,1000) BGP.otc: 209898 unicast [ibgp_server138 14:42:17.052 from 2a0a:e5c0:0:b::8a] (100/96) [AS1239i] via fe80::3eec:efff:fed2:d0c7 on eth5 Type: BGP univ BGP.origin: IGP BGP.as_path: 209898 15576 3356 174 1239 BGP.next_hop: 2a0a:e5c0:32:2::1 BGP.local_pref: 100 BGP.community: (3356,2) (3356,22) (3356,86) (3356,505) (3356,601) (3356,666) (3356,903) (3356,2074) (15576,100) (15576,102) (15576,1000) BGP.otc: 209898 -------------------------------------------------------------------------------- On the iBGP session we import/export everything that is either static or BGP,excerpt from server137: -------------------------------------------------------------------------------- Channel ipv6 State: UP Table: master6 Preference: 100 Input filter: ACCEPT Output filter: static_and_bgp Routes: 3 imported, 206002 exported, 2 preferred Route change stats: received rejected filtered ignored accepted Import updates: 211444 0 0 70 211374 Import withdraws: 230070 0 --- 24038 206032 Export updates: 645070 137427 98 --- 507545 Export withdraws: 64508 --- --- --- 96296 BGP Next hop: 2a0a:e5c0:0:b::89 fe80::3eec:efff:fed2:d1e4 IGP IPv6 table: master6 -------------------------------------------------------------------------------- But it seems server145 is not exporting them from how it looks: -------------------------------------------------------------------------------- Channel ipv6 State: UP Table: master6 Preference: 100 Input filter: ACCEPT Output filter: static_and_bgp Routes: 206011 imported, 3 exported, 206008 preferred Route change stats: received rejected filtered ignored accepted Import updates: 503843 0 0 445 503398 Import withdraws: 91701 0 --- 78 91623 Export updates: 927807 684226 97 --- 243484 Export withdraws: 33627 --- --- --- 230240 BGP Next hop: 2a0a:e5c0:0:b::91 fe80::2f0:cbff:fefe:b70c IGP IPv6 table: master6 -------------------------------------------------------------------------------- Even though a lot more routes match the filter: -------------------------------------------------------------------------------- bird> show route count filter static_and_bgp 3803744 of 3803746 routes for 950939 networks in table master4 824133 of 824170 routes for 206080 networks in table master6 Total: 4627877 of 4627916 routes for 1157019 networks in 2 tables bird> -------------------------------------------------------------------------------- So is this a misconfiguration or a bug or intended behaviour? Because *if* the upstream of server137 goes down, it starts receiving routes from server145, so failover works, but it seems wrong to me to not have the routes by default. Best regards, Nico p.s.: the config for server145 that does not export the routes is: -------------------------------------------------------------------------------- define pref_tunnel_fiberstream = 80; # used filter static_and_bgp { if source ~ [ RTS_STATIC, RTS_BGP ] then accept; reject; } protocol bgp outgoing_server120 { local as myas; direct; password "..."; bfd on; neighbor 2a0a:e5c0:31:4::1 as 209898; local role customer; default bgp_local_pref pref_tunnel_fiberstream; ipv6 { import filter allow_all; export filter p5_to_world; }; ipv4 { import filter allow_all; export filter p5_to_world; extended next hop on; }; } protocol bgp ibgp_server137 { local as myas; neighbor 2a0a:e5c0:0:b::89 as myas; direct; bfd on; ipv6 { import all; export filter static_and_bgp; gateway recursive; }; ipv4 { import all; export filter static_and_bgp; gateway recursive; extended next hop on; }; } -------------------------------------------------------------------------------- -- Sustainable and modern Infrastructures by ungleich.ch

4 4

Extended communities ASN wildcard, extraction of eclist.
by Ochalski, Radoslaw 03 Jul '24

03 Jul '24

Since we are missing a way to apply a wildcard on ASN for extended community, is there a way to extract value from ec list? Like for lc list. 2024-07-02 11:00:05.579 <INFO> Ext community(eclist (ro, 20940, value)) I would like to match all ASNs by value, not by ASN. Kind Regards, Radoslaw Ochalski Network Engineer Senior MON - FRI 08:00AM to 4:00 PM UTC [cid72*image015.png@01DA1C68.FE26C0A0] Connect with Us: [cid72*image009.png@01DA1C68.FE26C0A0]<https://community.akamai.com/> [cid72*image016.png@01DA1C68.FE26C0A0] <http://blogs.akamai.com/> [cid72*image017.png@01DA1C68.FE26C0A0] <https://urldefense.com/v3/__https:/twitter.com/akamai__;!!GjvTz_vk!XMttgAB4…> [cid72*image018.png@01DA1C68.FE26C0A0] <https://urldefense.com/v3/__http:/www.facebook.com/AkamaiTechnologies__;!!G…> [cid72*image019.png@01DA1C68.FE26C0A0] <https://urldefense.com/v3/__http:/www.linkedin.com/company/akamai-technolog…> [cid72*image020.png@01DA1C68.FE26C0A0] <https://urldefense.com/v3/__http:/www.youtube.com/user/akamaitechnologies?f…>

2 3